Enum pallet_amm::pallet::Call
source · pub enum Call<T: Config<I>, I: 'static = ()> {
add_liquidity {
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
desired_amounts: (BalanceOf<T, I>, BalanceOf<T, I>),
minimum_amounts: (BalanceOf<T, I>, BalanceOf<T, I>),
},
remove_liquidity {
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
liquidity: BalanceOf<T, I>,
},
create_pool {
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
liquidity_amounts: (BalanceOf<T, I>, BalanceOf<T, I>),
lptoken_receiver: T::AccountId,
lp_token_id: AssetIdOf<T, I>,
},
update_protocol_fee {
protocol_fee: Ratio,
},
update_protocol_fee_receiver {
protocol_fee_receiver: T::AccountId,
},
// some variants omitted
}
Expand description
Contains one variant per dispatchable that can be called by an extrinsic.
Variants
add_liquidity
Fields
Allow users to add liquidity to a given pool
pool
: Currency pool, in which liquidity will be addedliquidity_amounts
: Liquidity amounts to be added in poolminimum_amounts
: specifying its “worst case” ratio when pool already exists
remove_liquidity
Allow users to remove liquidity from a given pool
pair
: Currency pool, in which liquidity will be removedliquidity
: liquidity to be removed from user’s liquidity
create_pool
Fields
lp_token_id: AssetIdOf<T, I>
Create of a new pool, governance only
pool
: Currency pool, in which liquidity will be addedliquidity_amounts
: Liquidity amounts to be added in poollptoken_receiver
: Allocate any liquidity tokens to lptoken_receiverlp_token_id
: Liquidity pool share representative token
update_protocol_fee
update_protocol_fee_receiver
Implementations
sourceimpl<T: Config<I>, I: 'static> Call<T, I>
impl<T: Config<I>, I: 'static> Call<T, I>
sourcepub fn new_call_variant_add_liquidity(
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
desired_amounts: (BalanceOf<T, I>, BalanceOf<T, I>),
minimum_amounts: (BalanceOf<T, I>, BalanceOf<T, I>)
) -> Self
pub fn new_call_variant_add_liquidity(
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
desired_amounts: (BalanceOf<T, I>, BalanceOf<T, I>),
minimum_amounts: (BalanceOf<T, I>, BalanceOf<T, I>)
) -> Self
Create a call with the variant add_liquidity
.
sourcepub fn new_call_variant_remove_liquidity(
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
liquidity: BalanceOf<T, I>
) -> Self
pub fn new_call_variant_remove_liquidity(
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
liquidity: BalanceOf<T, I>
) -> Self
Create a call with the variant remove_liquidity
.
sourcepub fn new_call_variant_create_pool(
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
liquidity_amounts: (BalanceOf<T, I>, BalanceOf<T, I>),
lptoken_receiver: T::AccountId,
lp_token_id: AssetIdOf<T, I>
) -> Self
pub fn new_call_variant_create_pool(
pair: (AssetIdOf<T, I>, AssetIdOf<T, I>),
liquidity_amounts: (BalanceOf<T, I>, BalanceOf<T, I>),
lptoken_receiver: T::AccountId,
lp_token_id: AssetIdOf<T, I>
) -> Self
Create a call with the variant create_pool
.
sourcepub fn new_call_variant_update_protocol_fee(protocol_fee: Ratio) -> Self
pub fn new_call_variant_update_protocol_fee(protocol_fee: Ratio) -> Self
Create a call with the variant update_protocol_fee
.
sourcepub fn new_call_variant_update_protocol_fee_receiver(
protocol_fee_receiver: T::AccountId
) -> Self
pub fn new_call_variant_update_protocol_fee_receiver(
protocol_fee_receiver: T::AccountId
) -> Self
Create a call with the variant update_protocol_fee_receiver
.
Trait Implementations
sourceimpl<T: Config<I>, I: 'static> Decode for Call<T, I>
impl<T: Config<I>, I: 'static> Decode for Call<T, I>
sourcefn decode<__CodecInputEdqy: Input>(
__codec_input_edqy: &mut __CodecInputEdqy
) -> Result<Self, Error>
fn decode<__CodecInputEdqy: Input>(
__codec_input_edqy: &mut __CodecInputEdqy
) -> Result<Self, Error>
Attempt to deserialise the value from input.
fn decode_into<I>(
input: &mut I,
dst: &mut MaybeUninit<Self>
) -> Result<DecodeFinished, Error>where
I: Input,
fn decode_into<I>(
input: &mut I,
dst: &mut MaybeUninit<Self>
) -> Result<DecodeFinished, Error>where
I: Input,
Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
fn skip<I>(input: &mut I) -> Result<(), Error>where
I: Input,
fn skip<I>(input: &mut I) -> Result<(), Error>where
I: Input,
Attempt to skip the encoded value from input. Read more
fn encoded_fixed_size() -> Option<usize>
fn encoded_fixed_size() -> Option<usize>
Returns the fixed encoded size of the type. Read more
sourceimpl<T: Config<I>, I: 'static> Encode for Call<T, I>
impl<T: Config<I>, I: 'static> Encode for Call<T, I>
sourcefn encode_to<__CodecOutputEdqy: Output + ?Sized>(
&self,
__codec_dest_edqy: &mut __CodecOutputEdqy
)
fn encode_to<__CodecOutputEdqy: Output + ?Sized>(
&self,
__codec_dest_edqy: &mut __CodecOutputEdqy
)
Convert self to a slice and append it to the destination.
fn using_encoded<R, F>(&self, f: F) -> Rwhere
F: FnOnce(&[u8]) -> R,
fn using_encoded<R, F>(&self, f: F) -> Rwhere
F: FnOnce(&[u8]) -> R,
Convert self to a slice and then invoke the given closure with it.
fn encoded_size(&self) -> usize
fn encoded_size(&self) -> usize
Calculates the encoded size. Read more
sourceimpl<T: Config<I>, I: 'static> GetCallName for Call<T, I>
impl<T: Config<I>, I: 'static> GetCallName for Call<T, I>
sourcefn get_call_name(&self) -> &'static str
fn get_call_name(&self) -> &'static str
Return the function name of the Call.
sourcefn get_call_names() -> &'static [&'static str]
fn get_call_names() -> &'static [&'static str]
Return all function names.
sourceimpl<T: Config<I>, I: 'static> GetDispatchInfo for Call<T, I>
impl<T: Config<I>, I: 'static> GetDispatchInfo for Call<T, I>
sourcefn get_dispatch_info(&self) -> DispatchInfo
fn get_dispatch_info(&self) -> DispatchInfo
Return a
DispatchInfo
, containing relevant information of this dispatch. Read moresourceimpl<T: Config<I>, I: 'static> GetDispatchInfo for Call<T, I>
impl<T: Config<I>, I: 'static> GetDispatchInfo for Call<T, I>
fn get_dispatch_info(&self) -> DispatchInfo
fn get_dispatch_info(&self) -> DispatchInfo
👎Deprecated: Trait has moved to
frame_support::dispatch
sourceimpl<T: Config<I>, I: 'static> PartialEq<Call<T, I>> for Call<T, I>
impl<T: Config<I>, I: 'static> PartialEq<Call<T, I>> for Call<T, I>
sourceimpl<T: Config<I>, I: 'static> TypeInfo for Call<T, I>where
PhantomData<(T, I)>: TypeInfo + 'static,
(AssetIdOf<T, I>, AssetIdOf<T, I>): TypeInfo + 'static,
(BalanceOf<T, I>, BalanceOf<T, I>): TypeInfo + 'static,
(BalanceOf<T, I>, BalanceOf<T, I>): TypeInfo + 'static,
(AssetIdOf<T, I>, AssetIdOf<T, I>): TypeInfo + 'static,
BalanceOf<T, I>: HasCompact,
(AssetIdOf<T, I>, AssetIdOf<T, I>): TypeInfo + 'static,
(BalanceOf<T, I>, BalanceOf<T, I>): TypeInfo + 'static,
T::AccountId: TypeInfo + 'static,
AssetIdOf<T, I>: TypeInfo + 'static,
T::AccountId: TypeInfo + 'static,
T: Config<I> + 'static,
I: 'static,
impl<T: Config<I>, I: 'static> TypeInfo for Call<T, I>where
PhantomData<(T, I)>: TypeInfo + 'static,
(AssetIdOf<T, I>, AssetIdOf<T, I>): TypeInfo + 'static,
(BalanceOf<T, I>, BalanceOf<T, I>): TypeInfo + 'static,
(BalanceOf<T, I>, BalanceOf<T, I>): TypeInfo + 'static,
(AssetIdOf<T, I>, AssetIdOf<T, I>): TypeInfo + 'static,
BalanceOf<T, I>: HasCompact,
(AssetIdOf<T, I>, AssetIdOf<T, I>): TypeInfo + 'static,
(BalanceOf<T, I>, BalanceOf<T, I>): TypeInfo + 'static,
T::AccountId: TypeInfo + 'static,
AssetIdOf<T, I>: TypeInfo + 'static,
T::AccountId: TypeInfo + 'static,
T: Config<I> + 'static,
I: 'static,
sourceimpl<T: Config<I>, I: 'static> UnfilteredDispatchable for Call<T, I>
impl<T: Config<I>, I: 'static> UnfilteredDispatchable for Call<T, I>
type RuntimeOrigin = <T as Config>::RuntimeOrigin
type RuntimeOrigin = <T as Config>::RuntimeOrigin
The origin type of the runtime, (i.e.
frame_system::Config::RuntimeOrigin
).sourcefn dispatch_bypass_filter(
self,
origin: Self::RuntimeOrigin
) -> DispatchResultWithPostInfo
fn dispatch_bypass_filter(
self,
origin: Self::RuntimeOrigin
) -> DispatchResultWithPostInfo
Dispatch this call but do not check the filter in origin.
impl<T: Config<I>, I: 'static> EncodeLike<Call<T, I>> for Call<T, I>
impl<T: Config<I>, I: 'static> Eq for Call<T, I>
Auto Trait Implementations
impl<T, I> RefUnwindSafe for Call<T, I>where
I: RefUnwindSafe,
T: RefUnwindSafe,
<T as Config>::AccountId: RefUnwindSafe,
impl<T, I> Send for Call<T, I>where
I: Send,
T: Send,
impl<T, I> Sync for Call<T, I>where
I: Sync,
T: Sync,
impl<T, I> Unpin for Call<T, I>where
I: Unpin,
T: Unpin,
<T as Config>::AccountId: Unpin,
impl<T, I> UnwindSafe for Call<T, I>where
I: UnwindSafe,
T: UnwindSafe,
<T as Config>::AccountId: UnwindSafe,
Blanket Implementations
sourceimpl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
impl<T> DecodeAll for Twhere
T: Decode,
impl<T> DecodeAll for Twhere
T: Decode,
fn decode_all(input: &mut &[u8]) -> Result<T, Error>
fn decode_all(input: &mut &[u8]) -> Result<T, Error>
Decode
Self
and consume all of the given input data. Read moreimpl<T> DecodeLimit for Twhere
T: Decode,
impl<T> DecodeLimit for Twhere
T: Decode,
fn decode_all_with_depth_limit(limit: u32, input: &mut &[u8]) -> Result<T, Error>
fn decode_all_with_depth_limit(limit: u32, input: &mut &[u8]) -> Result<T, Error>
Decode
Self
and consume all of the given input data. Read morefn decode_with_depth_limit<I>(limit: u32, input: &mut I) -> Result<T, Error>where
I: Input,
fn decode_with_depth_limit<I>(limit: u32, input: &mut I) -> Result<T, Error>where
I: Input,
Decode
Self
with the given maximum recursion depth and advance input
by the number of
bytes consumed. Read moreimpl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
Convert
Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
. Read morefn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert
Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
. Read morefn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert
&Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s. Read morefn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert
&mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s. Read moresourceimpl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
sourcefn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key
and return true
if they are equal.impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
impl<T> FmtForward for T
impl<T> FmtForward for T
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
Causes
self
to use its Binary
implementation when Debug
-formatted.fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
Causes
self
to use its Octal
implementation when Debug
-formatted.fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
Formats each item in a sequence. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
Borrows
self
and passes that borrow into the pipe function. Read morefn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
Mutably borrows
self
and passes that borrow into the pipe function. Read morefn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Borrows
self
, then passes self.as_ref()
into the pipe function.fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Borrows
self
, then passes self.deref()
into the pipe function.impl<T> Pointable for T
impl<T> Pointable for T
impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T
. Read moreimpl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct
self
from the equivalent element of its
superset. Read morefn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if
self
is actually part of its subset T
(and can be converted to it).fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as
self.to_subset
but without any property checks. Always succeeds.fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts
self
to the equivalent element of its superset.impl<T> Tap for T
impl<T> Tap for T
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
Immutable access to the
Borrow<B>
of a value. Read morefn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the
BorrowMut<B>
of a value. Read morefn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
Immutable access to the
AsRef<R>
view of a value. Read morefn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
Mutable access to the
AsMut<R>
view of a value. Read morefn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
Immutable access to the
Deref::Target
of a value. Read morefn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
Mutable access to the
Deref::Target
of a value. Read morefn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap()
only in debug builds, and is erased in release builds.fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut()
only in debug builds, and is erased in release
builds. Read morefn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
Calls
.tap_borrow()
only in debug builds, and is erased in release
builds. Read morefn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
Calls
.tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read morefn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
Calls
.tap_ref()
only in debug builds, and is erased in release
builds. Read morefn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
Calls
.tap_ref_mut()
only in debug builds, and is erased in release
builds. Read moreimpl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from
.impl<T, S> UniqueSaturatedInto<T> for Swhere
T: Bounded,
S: TryInto<T>,
impl<T, S> UniqueSaturatedInto<T> for Swhere
T: Bounded,
S: TryInto<T>,
fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T
.